DICO controllers are powerful CPUs, able to interface with a supervisor PC through TCP/IP or Web-Server protocols and to manage remote I/O modules and intelligent nodes connected on one or more fieldbus systems.
They make it possible to design evolved supervision and control architecture without needing to introduce PC-based systems, with evident advantages in terms of reliability and management.
DICO AB: The new series of DICO A8 industrial controllers, based on a powerful ARM Cortex A8 500 MHZ CPU, are able to interface simultaneously with a number of fieldbus systems: EtherCAT, CAN Bus, Ethernet, RS232, RS485 and RS422.
TECHNICAL FEATURES
Microprocessor | ARM Cortex A8 500 MHZ 32 bits |
RAM memory (volatile) | 256 MB |
RAM memory (buffered) | 2 MB |
Memory | SD Flash 4 GB; SPI Flash 16MB |
EEPROM | 1Kb x 2 serial |
Programming | Language “C” |
Watch-Dog | yes |
Humidity: | UR 85% (non-condensing) |
Working temperature: | 0…60 °C |
VARIATIONS
DICO EX: The DICO EX series of industrial controllers, based on DSTni-EX 120MHz CPU, are able to interface with a supervisor PC through TCP/IP or Web-Server protocols and to manage remote I/O modules and intelligent nodes connected on one or more fieldbus systems (Ethernet, CAN and RS232/ RS485/RS422 and C.L.).
TECHNICAL FEATURES
Microprocessor | DSTni-EX 120MHz x86 |
Volatile Memory RAM | 4 MB |
Buffered Memory RAM | 2 MB |
Parallel FLASH memory | 4 MB |
Serial EEPROM | 1KB x 2 |
Programming | Language “C” |
Watch-Dog | Yes |
Humidity: | UR 85% (non-condensing) |
Working temperature: | 0…60 °C |