The DICO CANopen remote I/O digital modules, in the new 909 version and 908 series are the solution offered by System Electronics for the management of remote I/O on CANbus fieldbus system, able to combine a high standard of electronics necessary for the industrial context with an essential reduction of costs. 

If configured in PWM modality, the digital outputs can be used also as analogue outputs (to command, for example, electric heaters, proportional valves, etc.)

The DICO CANopen remote I/O digital modules come in 10 versions and differ on the basis of the number and type of outputs and inputs.

Discover the advantages of System Electronics’ products and contact us for all the information you need!

The DICO remote I/O analogue modules in the new 909 version and 908 series are the solution offered by System Electronics for the management of remote I/O on CANbus fieldbus system, able to combine a high standard of electronics necessary for the industrial context with an essential reduction of costs.
The module, in the complete version, has 4 live outputs and 8 analogue inputs.
The DICO 909 and 908 I/O analogue modules implement the DS-401 profile device of the standard CANopen.
Choose the configuration that best suits your needs.
Discover the advantages of the I/O analogue modules and contact us for more information.

System Electronics offers various solutions for the human/machine interfaces.

For the creation of mimic boards, for example, there is the DICO 908-H model, a remote I/O node with an extremely low-cost CAN interface fitted with a series of inputs and outputs specifically designed to manage keyboards, also matrix keyboards, and operate led lights.

The architecture of System Electronics’ DICO 908-H module is flexible and permits a rapid development of various systems based on the CAN interface; if necessary, it’s possible to add further dedicated inputs to the DICO 908-H module or connect any board from the System Electronics catalogue in standard CAN to add functionality.

The System Electronics line of products includes the family of DICO CANopen controllers with processors up to 120 Mhz, double Ethernet 10/100 and double opto-isolated CAN port. The family of DICO-908 boards and modules also includes I/O modules with digital inputs and outputs, incremental inputs for encoders, 0-10V 4-20mA analogue inputs, analogue inputs for small signals such as temperature and pressure.

Our HMI interfaces are ideal for technically advanced customers that need to customize the firmware and their knowledge of the C programming language. System Electronics, in fact, provides a template as a starting point for programming the 908-H board autonomously.

Adapt your HMI interface to your requirements and choose System Electronics.